Barrel Tools and Accessories

 
Barrel Shroud for Smith & Wesson M&P15-22
Barrel Shroud for Smith & Wesson M&P15-22
Barrel Shroud for Smith & Wesson M&P15-22

Smith & Wesson M&P15-22 Long Barrel Shroud

<
  • Price: $55
  • Includes Free Shipping

Description

This long barrel shroud is designed specifically for the Smith & Wesson M&P15-22, and is protected with a black hard coat anodized finish. Anodized to Type III Mil-Spec for a long service life. Our military items are anodized at the same facility at the same time, and are 100% designed, developed, and manufactured in the USA.

This long version recedes into the handguard 5/8 inch. We also offer a short version, which leaves a 3/4 inch gap.

This barrel shroud slips over the barrel (but does not lengthen the barrel), and is held in place by a stainless steel set screw. The set screw is positioned so that if you want to thread your barrel later, the mark from the set screw will be machined away. These are for the non-threaded muzzle.

Features

Barrel Shroud for Smith & Wesson M&P15-22
Barrel Shroud for Smith & Wesson M&P15-22
Barrel Shroud for Smith & Wesson M&P15-22

Smith & Wesson M&P15-22 Short Barrel Shroud

  • Price: $52
  • Includes Free Shipping

Description

This short barrel shroud is designed specifically for the Smith & Wesson M&P15-22, and is protected with a black hard coat anodized finish. Anodized to Type III Mil-Spec for a long service life. Our military items are anodized at the same facility at the same time, and are 100% designed, developed, and manufactured in the USA.

This short version leaves a 3/4 inch gap. We also have a long version, which recedes into the handguard 5/8 inch.

This barrel shroud slips over the barrel (but does not lengthen the barrel), and is held in place by a stainless steel set screw. The set screw is positioned so that if you want to thread your barrel later, the mark from the set screw will be machined away. These are for the non-threaded muzzle.

Features

 
Barrel Nut Wrench for Smith & Wesson M&P15-22

Smith & Wesson M&P15-22 Barrel Nut Wrench

  • Price: $27
  • Includes Free Shipping

Description

If your accuracy is starting to deviate, or you're getting a lot of "flyers", tighten the barrel nut and your groups should tighten up significantly.

This barrel nut wrench allows you to fully dis-assemble your Smith & Wesson M&P15-22, allowing access to every nook and cranny on your rifle (similar to removing the barrel on a 10/22). It also allows you to put free floating handguards on when installing our Free Floating Handguard Adapter.

The barrel nut wrench is machined from the highest quality U.S. steel bar stock available, and is designed and manufactured in the U.S using state-of-the-art computers and machining centers.

The lugs are designed to fit snuggly with minimum movement, which helps to keep the barrel nut wrench from getting damaged, and the outside of the wrench fits nicely inside the stock handguard.

There is some minor drilling or welding work you need to do once you receive the barrel nut wrench, and step-by-step, clear instructions are included.

CAUTION:
Do not hold the rifle by the upper or lower reciever for doing any barrel work. Only clamp onto the barrel. A chuck from a metal lathe will work, or use our MP15-22 Barrel Vise Jaws.

Features

 
Barrel Thread Converter for Smith & Wesson M&P15-22 Non-Threaded Muzzles

Smith & Wesson M&P15-22 Threaded Barrel End for Non-Threaded Muzzles

  • Price: $30
  • Includes Free Shipping

Description

Convert your non-threaded barrel to a standard 1/2-28 thread for all your end of barrel accessories. If you want to get the full fun factor out of your Smith & Wesson M&P15-22, you need to be able to mount any 1/2-28 threaded accessory such as a flash suppressor or compensator, or an unrestricted fake flash suppressor. This thread adapter easily attaches to the factory finished plain muzzle.

You can easily install any standard 1/2-28 muzzle brake, flash suppressor, or compensator. The largest diameter is a little larger than the current A2 Birdcage and similar flash suppressors.

This item is a lot less expensive than going to a machinist or gunsmith. Plus you can do it yourself in minutes, and it can be taken off quite easily. If you do want to thread your barrel later, the installation marks will be machined away.

NOTE:
Adapter only. You will need to purchase the end of barrel accessory and crush washer seperately.

Features

 
Crush Washers - 5 Pack

Crush Washers - 5 Pack

  • Price: $12
  • Includes Free Shipping

Description

Our crush washers for your tactical rifle are precision machined - not stamped - by highly skilled, true craftspeople in the USA.

These crush washers have been re-engineered for a better-looking assembly, and will look great on your Smith & Wesson M&P15-22 (or other firearms), as the standard crush washer on the M&P15-22 looks too large.

The major diameter of these washers is 11/16 or .688. The standard diameter of an M4 barrel is .7 at the muzzle. They will fit on any 1/2 thread, no matter the TPI.

Features